SFA Link

Thank you for visiting!

IXYSIC.com has moved to Littelfuse.com
If you are not redirected within 3 seconds, click here.


IX4351NE 9A Low Side SiC MOSFET & IGBT Driver
IX4351NEAU Automotive Grade

  • IX4351NEAU is AEC-Q100 Qualified
  • Separate 9A peak source and sink outputs
  • Operating Voltage Range: -10V to +25V
  • Internal negative charge pump regulator for selectable negative gate drive bias
  • Desaturation detection with soft shutdown sink driver
  • TTL and CMOS compatible input
  • Under Voltage lockout (UVLO)
  • Thermal shutdown
  • Open drain FAULT output
IX4351NE & IX4351NEAU Image

IX4351NE (Rev 3) Data Sheet
IX4351NEAU (Rev 1) Automotive Grade Data Sheet

IX4351-UG (Rev 2) Evaluation Board User's Guide

The IX4351NE is designed specifically to drive SiC MOSFETs and high power IGBTs. Separate 9A source and sink outputs allow for tailored turn-on and turn-off timing while minimizing switching losses. An internal negative charge regulator provides a selectable negative gate drive bias for improved dV/dt immunity and faster turn-off.

Desaturation detection circuitry detects an over current condition of the SiC MOSFET and initiates a soft turn off, thus preventing a potentially damaging dV/dt event. The logic input is TTL and CMOS compatible; this input does not need to be level shifted even with a negative gate drive bias voltage. Protection features include UVLO and thermal shutdown detection. An open drain FAULT output signals a fault condition to the microcontroller.

The IX4351NE is rated for operational temperature range of -40°C to +125°C,and is available in a thermally enhanced 16-pin narrow SOIC package.

The IX4351NEAU is AEC-Q100 Grade1 rated for an operational ambient temperature range of -40°C to +125°C, and is available in a thermally enhanced 16-pin narrow SOIC package..


IX4351 Functional Block Diagram
Sales Partner Login Sales Partner Login Link to IXYS Clare Partner Login - Password Required PARTNER LOGIN: PASSWORD REQUIRED